5
2
7
8
9
TWD-1594 Livo+ owners printer.qxp_Layout 1 2/21/17 2:10 PM Page 13
●
ture. Press this two buttons simultaneously again to close I FEEL function and " "
will disappear.
Please put the remote controller near user when this function is set. Do not put
the remote controller near the object of high temperature o
r low temperature in
order to avoid detecting inaccurate ambient temperature.When I FEEL function
is turned on, the remote controller should be put within the area where indoor
unit can receive the signal sent by the remote controller.
will automatically adjust the indoor temperature according to the detected tempera-
OPERATION OF WIRELESS REMOTE CONTROLLER
CHANGING BATTERIES AND ADDITIONAL NOTES
To change batteries, slide cover off battery compartment on back of remote controller. Remove
and safely discard old batteries. Insert two new AAA 1.5V dry batteries, using correct polarity.
Reattach back cover.
NOTE:
• If the remote controller will not be used for a long time, remove batteries to prevent
leakage damage.
• Be sure to aim the remote controller at the receiver of the main unit when operating.
• When remote emits a signal, icon will flicker; a tone will be heard when unit receives
that signal.
CHANGING BATTERIES
signal sender battery
Cover of battery box
remove
reinstall
To Next Page
Loading...
Need help?
General
