OPERATION OF SMART CONTROL
FOR USE WITH YOUR SMARTPHONE
For the ultimate in convenience, your
Sapphire
Heat Pump or Air Conditioner features a
built-in intelligent WIFI capability and Smart Control function. This allows you to operate
the unit through your smartphone. The system is compatible with devices using standard
Android or iOS operating systems.
Operating System Requirements for your smartphone:
iOS System supports iOS 7.0 and above.
Android System supports Android 4.0 and above.
STEP 1. Download and install GREE+ app on your smartphone
Scan this QR code to download the app directly from the Apple App Store
or the Google Play Store.
STEP 2. Turn ON the unit’s WIFI interface
Using the remote controller, turn ON the Sapphire system (making sure
the remote controller is paired). Press and hold the “TURBO”and “MODE”
buttons on the remote controller for at least 10 seconds until the unit
beeps for the second time and the WIFI icon appears on the display.
STEP 3. Launch the GREE+ app ON your smartphone
Open the app and follow its simple step-by-step instructions to register
your account and complete setup.
STEP 4.
Let the app be your guide
You are well on your way to controlling the unit through your smartphone.
You will find operation to be simple and easy, allowing you to adjust comfort
levels – even without the remote – from anywhere you have WIFI access.
For more info and updates to the GREE+ app, scan this “Help”
QR code, any time.
COMMON NETWORK SETTING PROBLEMS
If WIFI control fails, check the following items one by one:
•
Make sure electrical power is turned on to the outdoor and indoor units.
•
Make sure WIFI function is turned On as normal
TO RESET WIFI MODULE
Press“TURBO”and “Mode” buttons simultaneously. When the
Sapphire
unit emits a beep sound, WIFI module is successfully reset.
17
Get the app
Scan for Help
To Next Page
Loading...
Need help?
General
