To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...Why is my Gree Air Conditioner indoor unit emitting noise?
The noise from your Gree Air Conditioner indoor unit could be due to the fan or compressor relay switching on or off. Additionally, when defrosting starts or stops, a sound may occur due to the refrigerant flowing in the reverse direction.
Why is there moisture on the air outlet vent of my Gree Air Conditioner?
If your Gree Air Conditioner is running in high humidity for an extended period, moisture may condense on the air outlet grill and drip off.
How to fix a Gree Air Conditioner that blows out a bad smell when started?
If your Gree Air Conditioner emits a bad smell when initially started, it could be due to odors accumulated from the environment. Try cleaning the air filter. If the problem persists, the air conditioner may need professional cleaning by an authorized service center.
Why does my Gree Air Conditioner not run immediately after turning it on?
To protect your Gree Air Conditioner from damage due to immediate restarts, the microcomputer controller delays the unit's operation for 3 minutes after it has been stopped.
General| Type | Split Air Conditioner |
|---|---|
| Cooling Capacity | Varies by model (e.g., 9000 BTU, 12000 BTU, 18000 BTU, 24000 BTU) |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 or R410A |
| Air Flow (Indoor) | Varies by model (e.g., 500 - 1000 m³/h) |
Essential safety guidelines and operational advice for using the air conditioner to prevent hazards and ensure proper function.
Detailed instructions and warnings regarding the correct operation of the air conditioner, including airflow and usage restrictions.
Explains the working principle of cooling mode and the anti-freezing function of the air conditioner.
Details the heating operation principle, defrosting process, and anti-cool wind function.
Identifies and labels the key parts of both the indoor and outdoor units of the air conditioner.
Explains the operation of primary remote control buttons including ON/OFF, MODE, Temperature, and Fan Speed adjustments.
Details the usage of specific remote control buttons like Timer, Turbo, Health/Save, and Swing functions.
Explains specialized remote control functions such as Sleep mode, X-FAN, Light display, and Temperature display.
Provides step-by-step guides for general and optional operations using the remote control, including X-FAN function details.
Covers advanced features like AUTO RUN, Turbo, Lock, temperature units, and battery replacement instructions.
Details how to control the indoor unit's display light and operate the unit using the manual switch in emergencies.
Provides instructions for cleaning the air conditioner's front panel and air filters, including recommended frequency.
Outlines essential checks before operating the unit and maintenance steps to perform after use.
Addresses common operational phenomena such as unit not running, bad smells, noises, fogging, and cracking sounds with their respective solutions.
Covers troubleshooting for unit non-operation, reduced efficiency, remote control unavailability, and water leakage problems.
Addresses issues with indoor unit air delivery, moisture on vents, and lists critical situations requiring immediate attention and dealer contact.
Provides critical notices, basic requirements, and guidelines for selecting appropriate installation positions for both indoor and outdoor units.
Details safety requirements for electrical appliances, earthing procedures, and other important installation considerations.
Illustrates the required dimensions and clearances for installing the indoor and outdoor units of the air conditioner.
Provides step-by-step instructions for installing the rear panel, piping, drainage, and connecting electrical wires for the indoor unit.
Details the process of routing piping and wiring, and installing connection pipes with proper tightening torque.
Covers the electrical wiring for the outdoor unit and the essential air purging and leakage test procedures.
Explains methods for leak hunting and the installation of outdoor condensation drainage for heat pump models.
Outlines items to check after installation and the procedure for performing a test operation to ensure proper functioning.
Provides instructions for installing, cleaning, and maintaining the healthy filter, along with information on its service life.
