Need help?Do you have a question about the Gree TOSOT MOMA-19 and is the answer not in the manual?
General| Brand | Gree |
|---|---|
| Model | TOSOT MOMA-19 |
| Category | Air Conditioner |
| Language | English |
Details how to operate the air conditioner using the control panel, including button functions and indicators.
Describes the function of the ON/OFF button to turn the air conditioner on or off.
Explains how to adjust the set temperature using the +/- buttons for cooling and heating modes.
Guides users on how to point and operate the remote control towards the signal receiver for effective communication.
Explains various functions achieved by pressing combination of buttons on the remote controller.
Provides instructions for cleaning the exterior casing and grille of the air conditioner unit.
Details the process for removing, cleaning, and reinstalling the air conditioner's filter.
Discusses criteria for choosing a suitable installation location to prevent malfunctions.
Outlines specific requirements for the air conditioner's placement and surroundings.
Details safety precautions and regulations for the electrical connection of the unit.
Lists all the accessories provided with the air conditioner for installation and usage.
Explains how to drain collected water from the unit's lower drainage port.
Details the process for using the continuous drainage option via the middle hole with an attached hose.
Provides step-by-step instructions for installing the heat discharge pipe in a double window.
Guides on installing the heat discharge pipe in a double-hung sash window, including panel adjustments.
Details the process for installing the heat discharge pipe in a sliding sash window, covering different window widths.
Provides instructions for installing the heat discharge pipe through a window using specific joints.
Guides on installing the heat discharge pipe through a wall using provided joints and fixing methods.
Details the process for installing the heat discharge pipe in an immovable window, including cutting and joint fitting.
Provides steps to disassemble the heat discharge pipe for double window installations.
Guides on disassembling the heat discharge pipe from sash window installations.
Provides steps to disassemble the heat discharge pipe for standard window installations.
Guides on disassembling the heat discharge pipe from wall installations.
Details how to disassemble the heat discharge pipe from immovable window installations.
Outlines the necessary qualifications and expertise required for maintenance and repair personnel.
Details essential safety measures and precautions to be taken before commencing installation work.
Advises against using ignition sources when searching for or detecting refrigerant leaks.
Emphasizes the importance of checking the work area for safety and potential hazards before and during maintenance.
Specifies checks for refrigeration components and adherence to manufacturer guidelines during maintenance.
Covers initial safety checks and component inspection procedures for electrical devices.
Advises checking cabling for wear, corrosion, and environmental effects.
Lists acceptable methods for detecting refrigerant leaks, emphasizing safety and calibration.
Outlines conventional and safe procedures for breaking into the refrigerant circuit.
Details requirements for charging the system with refrigerant, including pressure testing and leak detection.
Outlines the essential steps and precautions for safely decommissioning the equipment and its refrigerant system.
Specifies requirements for labelling equipment that has been de-commissioned and contains flammable refrigerant.
Provides guidelines for safely removing and transferring refrigerant into designated cylinders.
To Next Page
