Power cord hooks
Optional 1
Joint A
Heat discharge pipe
Drain connector
Screws
Remote control
User's manual
Battery
(AAA 1.5V)
Preparation before Installation
NOTICE: Check if the accessories are available before installation.
Accessory list
20
Optional 2
Insect guard net
Bracket Sponge A Sponge B
The appliance shall be installed in accordance with national wiring regulations.
To be in compliance with IEC 61000-3-11, impedance value of power-supply system
connected to product must be less than or equal to the allowable maximum value
of |Zsys| in the following sheet:
10.
11.
JointB Joint C
Joint B Joint C
0.13
Extension panel
Adjustment panel
Window panel
Exhaust cover
To Next Page
Loading...
Need help?
General
