OPERATING INSTRUCTIONS
17
USING THE CORD RETAINER (See Figure 10)
This snow thrower is equipped with a cord retainer (1) in order to prevent the extension cord from
disconnecting from the power cord while the snow thrower is in use. The cord retainer hangs
from the cord guide bar.
NOTE: Do not plug the extension cord into the outlet until it has been connected to the cord retainer and
plugged into the snow thrower.
To use the cord retainer:
• Fold the extension cord to form a tight loop near the retainer.
• Push the loop through the bottom hole in the retainer.
• Slide the loop over the retaining clip, and pull until the cord is secured.
Fig. 10
1
To Next Page
Loading...
Need help?
General
