10
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
hrs Hours Time
No Load Speed Rotational speed, at no load
Class II Construction Double-insulated construction
.../min Per Minute
Revolutions, strokes, surface speed, orbits
etc., per minute
Safety Alert Symbol Precautions that involve your safety.
Read the Owner's Manual
To reduce the risk of injury, user must read and
understand Owner's Manual before using this
product.
Keep Bystanders Away Keep all bystanders at least 50' (15 m) away.
Gloves
Wear non-slip, heavy-duty protective gloves
when handling the pole saw and the blade.
Safety Footwear
Wear non-slip safety footwear when using this
equipment.
Risk of Electrocution DANGER! Risk of electrocution!
Electric Shock
Failure to use in dry conditions and to observe
safe practices can result in electric shock.
No Hands Symbol
Failure to keep your hands away from the
blade will result in serious personal injury.
No Damaged Cords Symbol
Replace damaged cords immediately.
Damaged cords increase the risk of electric
shock.
Eye, Ear and Head Protection
Wear eye, ear and head protection when
operating this equipment. Wear dust masks.
Kickback DANGER! Beware of kickback.
Operate With Two Hands Do not operate the saw with one hand!
Wet Conditions Alert Do not expose to rain or use in damp locations.
SYMBOLS
To Next Page
Loading...
Need help?
General
