8
ELECTRICAL
DOUBLE INSULATED
The pole saw is double insulated to provide a double thickness of insulation between you and
the tool’s electrical system. All exposed metal parts are isolated from the internal metal motor
components with protective insulation.
GROUNDING INSTRUCTIONS
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least
resistance for electric current, and reduces the risk of electric shock.
This tool is equipped with a power cord that has a POLARIZED plug. The power cord MUST be
plugged into a matching outlet that is properly installed and grounded in accordance with ALL
local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not t the outlet, have the proper outlet
installed by a qualied electrician.
WARNING
To avoid electrical hazards, re hazards, or damage to the tool, use proper circuit protection. This
chainsaw is wired at the factory for 120V operation. Connect to a 120V, 15A circuit, and use a
15A time-delayed fuse or circuit breaker. To avoid shock or re when the power cord is worn, cut,
or damaged in any way, replace it immediately.
WARNING
To avoid injury, use only identical replacement parts when servicing the pole saw.
WARNING
Double insulation does not take the place of normal safety precautions when operating this tool.
WARNING
TO AVOID ELECTRIC SHOCK:
1. Use only identical replacement parts when servicing a tool with double insulation. Servicing
should be performed by a qualied technician.
2. Do not use in wet or damp areas or expose to rain.
WARNING
In all cases, make certain the receptacle in question is properly grounded. If you are not sure,
have a certied electrician check the receptacle.
To Next Page
Loading...
Need help?
General
