Growatt MIN 6000TL-X User Manual

14
13
5.2 Selecting the installation location
ØThis is guidance for installer to choose a suitable installation location, to avoid
potential damages to device and operators.
ØThe installation location must be suitable for the inverter's weight and dimensions
for a long period time.
ØSelect the installation location so that the status display can be easily viewed.
ØDo not install the inverter on structures constructed of flammable or thermolabile
materials.
ØNever install the inverter in environment of little or no air flow, nor dust
environment. That may derate the efficiency of the cooling fan of the inverter.
ØThe Ingress Protection rate is IP65 which means the inverter can be installed
outdoors and indoors.
ØThe humidity of the installation location should be 0~100% without condensation.
ØThe installation location must be freely and safely to get at all times.
ØVertically installation and make sure the connection of inverter must be downwards.
Never install horizontal and avoids forward and sideways tilt.
ØBe sure that the inverter is out of the children's reach.
ØDon't put any things on the inverter. Do not cover the inverter.
ØDo not install the inverter near television antenna or any other antennas and
antenna cables.
ØInverter requires adequate cooling space. Providing better ventilation for the
inverter to ensure the heat escape adequately. The ambient temperature should be
below 40°C to ensure optimum operation.
ØDo not expose the inverter to direct sunlight, as this can cause excessive heating and
thus power reduction.
ØObserve the Min. clearances to walls, other inverters, or objects as shown below:
Ambient dimensions of one inverter
Ambient dimensions of series inverters
ØThere must be sufficient clearance between the individual inverters to ensure that
the cooling air of the adjacent inverter is not taken in.
ØIf necessary, increase the clearance spaces and make sure there is enough fresh air
supply to ensure sufficient cooling of the inverters.
The inverter can't install to solarization， drench，firn location. We suggest that the
inverters should be installed at the location with some cover or protection.

Growatt MIN 6000TL-X Specifications

General

Purpose	Solar panel
Efficiency	98.4 %
Input current	27.2 A
Input voltage	80 - 500 V
Output current	16 A
Output voltage	100 V
Input frequency	50/60 Hz
Power supply type	Indoor
Power current type	DC1-to-DC2
Maximum input power	6000 W
Maximum input voltage	500 V
Output power capacity	6 kVA
Quantity per pack	1 pc(s)
Product color	White

Weight and Dimensions

Depth	350 mm
Width	375 mm
Height	160 mm
Weight	10800 g