LED PANEL AND BUTTONS
1. Main Power Button: Short press for 1 second to turn on; long press for 3 seconds to turn off.
2. Solar Panel Connection Indicator: The icon lights up to indicate solar panel connection. When the PV input power is below 25W, the
icon flashes quickly; when it exceeds this value, the icon remains steadily lit.
3. Micro-inverter Operation Indicator: The icon lights up to indicate that the NOAH 2000 is powering the micro-inverter.
4. IoT Button (WiFi-Bluetooth)：
a. Short press for 1 second, IOT icon blinks, indicating it's ready to connect.
b. IOT icon stays on, indicating a successful connection.
c. Long press for 3 seconds to reset, IOT icon blinks.
5. IoT Indicator (WiFi-Bluetooth)：The icon lights up to indicate successful network pairing.
6. Battery Level Indicator： Shows the percentage of battery charge, with one bar representing 0-25%. When the battery level is 0-10%
and the entire system is in standby or discharging mode, the first indicator light on the left flashes quickly.
INSTALLATION
1. When wiring, please ensure that the wire labels correspond to the markings on the enclosure.
2. When stacking three or more units, wall fixation is required to prevent tipping. A maximum of four units can be stacked.
3. Avoid direct sunlight on the product.
APPLICATION 1: NOAH 2000（×1）+SOLAR MODULE（×2）
1. Connect DC Output Cable to NOAH 2000.
To Next Page
Loading...
Need help?
General
