EasyManuals Logo
Home>Grundfos>Water Pump>UPM3

Grundfos UPM3 User Manual

Grundfos UPM3
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
12. Technical data
12.1 Operating conditions
12.1.1 Ambient and liquid temperature
The ambient and liquid temperature of the specific pump is indicated in the table below. The ambient temperature is measured in a distance of
not more than 5 cm in front of the front foil at its lower edge.
55 °C ambient at
95 °C liquid tem-
perature
70 °C ambient at
65 °C liquid tem-
perature
70 °C ambient at
110 °C liquid
temperature
60 °C ambient at
130 °C liquid
temperature
95 °C ambient
temperature
Standard variants
GFNHB UPM3S
GFNKB UPM3
GFNKC UPM3L
Flammable refrigerant
environment variants
GFNHF UPM3S
GFNKG UPM3
GFNKH UPM3L
The above-mentioned temperature ranges do not take temperature limitations of the drinking water approvals into account.
UPM3, IP44 above dew point of ambient air: min. 2 °C
UPM3, IP4XD as K version with drain hole: min. -10 °C.
Related information
10. Storing the product
12.1.2
Relative humidity
IP44: The relative humidity must not exceed 95 % in a non-
condensing environment.
The dew point of the air at ambient temperature should al-
ways be lower than the liquid temperature, otherwise con-
densation may form in the stator housing.
K-Version/IPX4D: Condensation is acceptable.
12.1.3 Minimum inlet pressure
To avoid cavitation noise and damage to the pump bearings, the
following minimum pressures are required at the pump inlet port.
Liquid temperature 75 °C 95 °C 110 °C
Pressure
0.005 MPa 0.05 MPa 0.108 MPa
0.05 bar 0.5 bar 1.08 bar
13. Disposing of the product
This product or parts of it must be disposed of in an environmentally
sound way.
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest Grundfos company or
service workshop.
The crossed-out wheelie bin symbol on a product
means that it must be disposed of separately from
household waste. When a product marked with this
symbol reaches its end of life, take it to a collection
point designated by the local waste disposal authori-
ties. The separate collection and recycling of such
products will help protect the environment and human
health.
See also end-of-life information at www.grundfos.com/product-
recycling.
20
English (GB)

Other manuals for Grundfos UPM3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grundfos UPM3 and is the answer not in the manual?

Grundfos UPM3 Specifications

General IconGeneral
BrandGrundfos
ModelUPM3
CategoryWater Pump
LanguageEnglish

Related product manuals