Grundig Vision 7 - Operation with Common Interface; Inserting the Common Interface Module; Access Control for CI Module and Smart Card

ENGLISH
37
Inserting the Common Interface module
Note:
Switch off the appliance before inserting the CI module in the
»
CI« slot.
1 Insert the smart card into the CI module.
2 Insert the CI module with the smart card into the »CI« slot on the
television.
Note:
To see which CI module is in the Common Interface slot, go to the
»CA - Module« submenu.
Access control for CI module and smart card
1 Open the »MAIN MENU« menu with »i«.
2 Select »Features« with » Λ « or » V « and press »G« to confirm.
3 Select »IDTV Settings« with » Λ « or » V « and press »G« to
confirm.
4 Select »CA - Module« with » Λ « or » V « and press »G« to
confirm.
Notes:
This menu give operating instructions and – after you enter your
PIN code – access to channels of the PAY-TV provider.
The remaining settings are described in the manuals for your CI
module and smart card.
5 Press »i« to end the setting.
OPERATION WITH COMMON INTERFACE
IDTV SETTINGS
No CA-Module
1.1.4
Version
Software Update
Signal Information
CA - Module
Parental Control
Time Settings
Language Settings
Select and Open
Back
Exit