Haier 32E4000R User Manual

19
2. Press OK to select Set up for home use. Home mode is the right choice for enjoying your TV. It provides
energy saving opons as well as access to all features of the TV.
Note
: Store mode congures the TV for retail display and is not recommended for any other use. In store
mode, some features of the TV are missing or limited. To switch from one mode to the other, you have to
perform a factory reset as explained in “Factory reset everything” on page 61 , and then repeat Guided
Setup.
Aer you select Set up for home use, the TV scans for the wireless networks within range and displays them in
order, with the strongest signals rst. In addion to your own wireless signal, the TV might pick up signals from your
neighbors.
3. Press or to highlight the name of your wireless network, and then press OK to select it.
Other options:
• Connect to the Internet later – If you’re unable to connect to the Internet, that’s OK. You can skip this step
and use the TV to watch broadcasts, play games, and watch DVDs. If you want to connect later, it’s easy.
We’ll show you how in “Benets of connecng” on page 25 . Connecng the TV enables you to choose
from thousands of streaming channels so the TV really wants you to connect, and will try a couple more
mes to convince you that connecng is a good idea.
Note
: If you decide not to connect, Guided Setup skips ahead to seng up the devices that you’ve connected
to your TV. See “Non-connected Haier • Roku TV Home screen” on page 25 to get started using your non-
connected TV.
• Scan again / Scan again to see all networks – This opon depends on the number of wireless networks

Haier 32E4000R Specifications

General

Brand	Haier
Model	32E4000R
Category	HDTV
Language	English