15
18
Setting the USB storage time
1. In unlocked mode, press and hold "
" key for 3 seconds, the temperature display
steadily shows "1P".
("1P/2P/3P/4P/5P" stands for "Years/Months/Days/Hours/Minutes" respectively)
2.
Press " " or " " key, select years. The choices are from 10 to 99. If you want to set
the year 2013, select 13.
Press "Set" key to save the changes. Then, the temperature display steadily shows "2P".
Follow the procedure above to set "2P", "3P", "4P" and "5P" respectively, and press
"Set" key to save the changes.
Then, the temperature display will show "1P" again, and you can set 1P to 5P again.
For example: Set the time as 08:30, Aug. 16, 2013
3. After the settings are completed, press and hold "Set" for 5 seconds, the changes
will be saved and exit the settings automatically. Then, the temperature display will
normally show the inner temperature.
Push for
3 seconds
Push for
5 seconds
To Next Page
Loading...
Need help?
General
