EN
10-Care and cleaning
10.3 Empty the water tank
During operation, steam is condensed into water and
collected in the water tank. Empty the water tank after
each drying cycle.
1. Pull out the water tank from its housing (Fig. 10-9).
2. Empty the water tank (Fig. 10-10).
3. Reinstall the water tank to the tumble dryer (Fig.
10-11).
Notice
Do not use the water for any kind of drinking or food processing.
kg
9
A
++
kg
9
++
A
i-REFR
ESH
ry Level
Delay
Wrink le Fre e
Te mp.
Ba byca re
Quick Dry
ix
Cotto n
Duvet
Synt hetics To wel
War m U p
Shir t
Wool T ime r
Bulk y
elic ate Spor ts
Childl ock i-Re fres h
kg
9
A
+
+
kg
9
++
A
i-REFR
E
SH
10-9
10-10
10-11
10.4 Tumble dryer
Wipe the outside of the tumble dryer and the control panel with a damp cloth. Do
not use any organic solvent or corrosive agent to avoid damage to the device.
10.5 Drum
After running for a while, micro elements like calcium and mineral substances contained
n the water will result in an invisible film formed inside the drum. Use a damp cloth and
some detergent to remove it. Do not use any organic solvent or corrosive agent
to avoid damage to the device.
10.6 Evaporator
If the evaporator behind the condenser fi lter is dirty, it can be cleaned by using
a vacuum cleaner. Make sure not to damage the evaporator while cleaning it.
22