Haier HD90-A2939 User Manual

EN
11-Troubleshooting
Many problems can be solved by yourself without specifi c expertise.
please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
▶ Before maintenance, turn off the appliance and disconnect the mains plug from
the socket.
▶ Electrical equipment should be serviced only by qualifi ed electrical experts, because
improper repairs can cause considerable consequential damages.
▶ A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualifi ed workers in order to avoid a hazard.
Troubleshooting with display code
Code Cause Solution

Drain pump error. Contact the customer service.


The condenser thermal sensor is open-circuited or
short-circuited.
Contact the customer service.

Temperature of the laundry in the drum does not change. Contact the customer service.

Communication failure between PCB and display. Contact the customer service.

Temperature is too low.
Use the dryer when air tem-
perature is higher than 5 °C.
if the error codes appear again after taking measures, switch off the appliance,
disconnect the power supply and contact the customer service.
23

Haier HD90-A2939 Specifications

General

Heat source	Electric
Power plug type	Type F
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy consumption	2.1 kWh
Energy efficiency scale	A+++ to D
Annual energy consumption	258 kWh
Cycle time	235 min
Noise level	65 dB
Drying class	B
Drum capacity	9 kg
Anti-Crease function	Yes
Number of drying programs	15
Door color	Black
Door hinge	Right
Drum volume	112 L
Control type	Rotary
Loading type	Front-load
Drum material	Galvanized
Drying system	Heat pump
Product color	White
Appliance placement	Freestanding
Self-cleaning	-
Delay start (max)	24 h
Package depth	726 mm
Package height	656 mm
Package weight	53000 g
Drying rack included	No

Weight and Dimensions

Depth	665 mm
Width	595 mm
Height	850 mm
Weight	50000 g