EN
10-Care and cleaning
10.1 Lint fi lter cleaning
Clean the lint fi lter after each dry cycle.
1. Remove the lint fi lter from the drum (Fig. 10-1).
2. Open up the lint fi lter (Fig. 10-2).
3. Remove the lint residuals from lint filter (Fig. 10-3).
4. Reinstall the cleaned lint fi lter in the tumble dryer
(Fig. 10-4).
10.2 Condenser fi lter cleaning
Clean the fi lter after each dry cycle.
1. Open the door.
2. Pull out the lint fi lter from front duct (Fig. 10-6).
3. Pull out the condenser fi lter from the air duct (Fig.
10-7).
4. Separate the sponge and clean the filter the sponge and
clean the fi lter screen form any residuals (Fig. 10-8).
5. Reinstall the sponge to the condenser fi lter and put
Notice
If the lint / the condenser fi lter is very dirty, it can be cleaned under running water.
Let it dry completely before use.
10-1
10-2
10-3
10-4
10-5
10-6
10-7
10-8
it back into the duct.
21