EN
General information
Measures must be taken to ensure that built-under and built-in units that are subsequently re-sited
as free-standing appliances cannot topple over. This can be achieved by bolting the dishwasher to
the wall or fitting it under a continuous work surface which is screwed to the adjacent cupboards.
Information on comparability tests implemented in compliance with
AS/NZS 2007
Height-adjustable top-basket must be inserted in the uppermost position.
If the comparability tests do not comply fully with AS/NZS 2007, e.g., degree of soiling, type of dishes and
cutlery, etc., contact the appliance manufacturer before starting the test.
Appliance loaded in accordance with standard specifications.
Example of loaded dishwasher: See fig. 1 , 2.
Capacity: 12 place settings
Comparability programme: NORMAL ECO
Rinse-aid setting: 5
Detergent: 5g+25g
29
Fig.1 Fig.2
To Previous Page
Loading...
Need help?
General
