LED SCREEN
The LED screen displays available cycles, settings, estimated cycle time, icons
for active options, lock indicators, and an operating status(SOAK, WASH, RINSE,
SPIN,DRY).
Use the buttons along the bottom of the display to adjust settings. See “CYCLE
GUIDE” for available settings on each cycle.Not all settings are available with all
cycles.
ENGLISH
DOOR LOCK INDICATOR
The washer / dryer door will automatically lock during operation. A lock icon will
appear on the LED screen when the door is locked.
NOTE: If a wash operation is paused, the door will unlock within 2 seconds.
If a dry operation is paused, the door will unlock after the inside temperature cools
to a safe temperature. The cooling time can take several minutes.
CHILD LOCK INDICATOR
After starting the washer, press the "Wash Temp" and "Spin Speed" buttons at the
same time for 2 seconds to activate the Child Lock feature. A child icon will appear
on the LED screen. This feature is intended to prevent accidental changes to the
operating machine. To cancel, press the "Wash Temp" and "Spin Speed" buttons
again for 2 seconds. The child icon will disappear from the LED screen.
NOTE: This feature does not lock out the POWER ON/OFF button.
CYCLE SIGNAL INDICATOR
This signal is helpful when you are removing items from hte washer as soon as it stops.
press the Spin Speed and Soil Level buttons for 2 seconds to activate the cycle
signal feature. A signal icon will appear on the LED screen. To cancel, press the
Spin Speed and Soil Level buttons again at the same time. The signal icon will disappear
from the LED screen.
POWER-OFF MEMORY
This machine has a power-off memory feature. In case of power failure or if the
power is interrupted during an operating cycle, the settings will be saved, and
operation will resume after pressing the POWER ON /OFF button when the
power is restored.
ENGLISH
18
To Next Page
Loading...
Need help?
General
