English
19
Installing Quick Sink Adapter:
When installing quick sink faucet adapter to the faucet, follow the steps below:
A. First remove the aerator from your faucet nozzle and determine the
size/type of the faucet.
B. Once you determine the size/type of the faucet (Outside Threaded End
or Inside Threaded End), place the proper size of rubber washer in
silver faucet adapter.
C. Attach the silver faucet connector to the faucet.
D. Attach faucet connector with water inlet hose by making sure that
rubber washer goes in between.
E. Attach the other end of the water inlet hose to the washer water inlet by
making sure that the rubber washer goes in between.
To Next Page
Loading...
