EasyManuals Logo

Haier HSU-10TSV13-SC User Manual

Haier HSU-10TSV13-SC
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Maintenance
For Smart Use of The Air Conditioner
Setting of proper room
temperature
Close doors and windows
during operation
If the unit is not to be used
for a long time, turn off the
power supply main switch.
Use the timer effectively
Use the louvers effectively
Do not block the air inlet
or outlet
Proper
temperature
During cooling operation
prevent the penetration of
direct sunlight with
curtain or blind
OFF
Air Filter cleaning
Open the inlet grille by pulling it upward.
Remove the filter.
Push up the filter's center tab slightly until it is released
from the stopper, and remove the filter downward.
Clean the filter.
Use a vacuum cleaner to remove dust, or wash the filter
with water.After washing, dry the filter completely in the
shade.
Attach the filter.
Attach the filter correctly so that the "FRONT" indication is
facing to the front. Make sure that the filter is completely
fixed behind the stopper. If the right and left filters are not
attached correctly, that may cause defects.
Close the inlet grille.
Remote Controller
Do not use the following for cleaning
Do not use water ,wipe the controller with a
dry cloth.Do not use glass cleaner or chemical
cloth.
Gasoline,benzine, thinner or cleanser may
damage the coating of the unit.
Hot water over 40
O
C(104
O
F) may cause
discoloring or deformation.
Wipe the air conditioner by using a soft and
dry cloth.For serious stains,use a neutral
detergent diluted with water.Wring the water
out of the cloth before wiping.then wipe off
the detergent completely.
Indoor Body
Once every
two weeks
1.Open the lnlet Grille
2.Detach the standard air filter
3.Attach Air Purifying Filter
4.Attach the standard air filter
(Necessary installation)
Slide the knob slightly upward to
release the filter, then withdraw it.
Put air purifying filter appliances into
the right or left filter frames.
Detach old Air Purifying Filter
5.Close the Inlet Grille
Close the Grille surely
NOTE:
Replacement of Air Purifying Filter
Prop up the inlet grille by using a
small device named grille-support
which located in the right side of
the indoor unit
ATTENTION:
The white side of the photocatalyst air purifying filter
face outside,and the black side face the unit. The green
side of the bacteria-killing medium air
purifying filter face
outside,
and the white side face the unit.
The photocatalyst air purifying filter will be solarized in fixed
time. In normal family,
it will be solarized every 6 months.
The bacteria-killing medium air purifying filter will be used
for a long time,no need for replacement. But in the period
of using them ,you should remove the dust frequently by
using vacuum cleaner or flaping them lightly,otherwise ,
its performance will be affected.
Please keep the bacteria-killing medium air purifying filter in
the cool and dry conditions avoid long time directly sunshine
when you stop using it,or its ability of sterilization will be
reduced.
(NOTE: Air purifying filter is optional part)
5
Press the “SLEEP” button for 5s to partially raise the panel.
Open the panel by hand and support the panel with a holder
Remove the filter
Clean the filter
Fit the filter
Once every
two weeks
5
Remove the holder and close the panel
Long press the “SLEEP” button and the
panel will automatically lower down and
become closed
6
7
Air Filter cleaning

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier HSU-10TSV13-SC and is the answer not in the manual?

Haier HSU-10TSV13-SC Specifications

General IconGeneral
BrandHaier
ModelHSU-10TSV13-SC
CategoryAir Conditioner
LanguageEnglish

Related product manuals