Haier HW50-10F1 User Manual

67
Allrepairingoperationsrequiredforyourmachineshouldbe
carriedoutbyourauthorisedservice.Ifyourmachinere-
quiresarepairorifyoucannotremovethefaultbythehelp
oftheinformationprovidedasfollows:
• Unplugyourmachine.
• Turnthewatertapoff.
(*)Seethechapterregardingmaintenanceandcleaningof
yourmachine.
67
CHAPTER -9: TROUBLESHOOTING
FAULT
Yourmachinedoes
notstart.
Yourmachinedoes
notintakewater.
Itisnotplugged. Plugmachinein.
Replacethefuses.
Checkmainspower.
PressonStart/
Pausebutton.
Switchtheprogramme
buttontothedesired
position.
Closethemachine
door.
Turnyourtabon.
Checkwaterinlet
hoseanduntwist.
Cleanwaterinlethose
lters.(*)
Cleanthevalve
inletlters.(*)
Closethemachine
door.
Fuse“blown”
Electricitycut-off.
Start/Pausebutton
notpressed.
Programmedial
‘stop’position.
Themachinedooris
notcompletelyclosed.
Watertapisturnedoff.
Waterinlethose
maybetwisted.
Waterinlethose
clogged.
Valveinletlter
clogged.
Themachinedoor
notcompletely
closed.
POSSIBLE
CAUSE
TROUBLE-
SHOOTING

Haier HW50-10F1 Specifications

General

Brand	Haier
Model	HW50-10F1
Category	Washer
Language	English