3-Control panel
EN
8
1 Detergent /Softener
drawer
2 Programme selector
3 Display
4 “
5 Function buttons
6 “Delay” button
7 “Start/Pause“ button
Note : Acoustic signal
In following cases an acoustic signal sounds:
▶ when pressing a button
▶ when turning the programme selector
▶ at the end of programme
▶ in case of failures
The acoustic signal can be deselected if necessary; see DAILY USE.
Press this button (Fig. 3-1) gently to switch on, the dis-
play is shining, the indicator of the “Start/Pause” button
is flashing. Press it again for about 2 seconds to switch
a while machine will shut down automatically.
3.2 Programme selector
By turning the knob (Fig. 3-2) one of 16 programmes
can be selected, related LED will light up, its default
settings will be displayed.
3.3 Displ ay
The display (Fig. 3-3) shows following information:
▶ Washing time
▶ End time delay
▶ Error codes and service information
3-1
3-2
421
5 6 7
3
3
3-3
STE AM
HW70-BP1439
7
To Next Page
Loading...
Need help?
General
