EN
3-Control panel
9
Control panel is locked.
Steam.
Alarm.
Pre-wash.
Delay.
3.4 Function buttons
The function buttons (Fig. 3-5) enable additional op-
tions in the selected programme before programme
starts. The related indicators are displayed.
o-
gramme, all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
Note: Factory settings
there is no special requirement default settings are recommended.
3-5
Steam
3-4
Display symbols
Speed, Temperature, etc
3.4.1-Function button “ Delay“
Touch this button(Fig . 3-6) to start the programme with a delay. End time
delay could be increased in steps of 30 minutes from 0,5-24h(End time will
longer than original programme time).For example display off 6:30 means
end of programme cycle will be in 6 hours and 30 minutes.Touch “Start/Pa
use” button to activate the time delay. It is not applicable to programme Spin,
Refresh,Remote.
3-6
Delay
Delay
To Next Page
Loading...
Need help?
General