EasyManuals Logo
Home>Haier>Washer>HW90-B14939S8

Haier HW90-B14939S8 User Manual

Haier HW90-B14939S8
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
of a problem please check all shown possibilities and follow below instructions before you
WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
improper repairs can cause considerable consequential damages.
A damaged power cable should only be replaced by the manufacturer, its service
9.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
The remaining wash cycle time will be 1 hour and 25 minutes.
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 minutes.
AUTO
Automatic load detection is working; only in some programmes.
End
Door is closed because of high water level, high water temperature or spinning cycle.
bEEP OFF
The buzzer is deactivated.
bEEP ON
The buzzer is activated.
9.2 Troubleshooting with display code
Problem Cause Solution
CLR FLTR
Drainage error, water is not fully drained
within 6 minutes.
Check drain hose installation.
E2
Lock error. Shut the door properly.
E4
Drain hose is self-syphoning.
Make sure that tap is fully opened and water
pressure is normal.
Check drain hose installation.
E8
Water protective level error. Contact the After sales service.
The function keys is closed.The programme changing is invalid.
9-Troubleshooting
EN
22
Water level not reached after 12 minutes.
E5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier HW90-B14939S8 and is the answer not in the manual?

Haier HW90-B14939S8 Specifications

General IconGeneral
Door colorBlack
Door hingeLeft
Motor typeBeltless
Drum volume65 L
Control typeButtons, Rotary
Door openingSide opening
Loading typeFront-load
Tub materialStainless steel
Product colorAnthracite
Built-in displayYes
Appliance placementFreestanding
Drum capacity9 kg
Cycle time (max)238 min
Delay start (max)24 h
Spin-drying classB
Maximum spin speed1400 RPM
Noise level (spin)67 dB
Noise level (wash)- dB
Load balancing system-
Number of washing programs15
Power plug typeType F (CEE 7/4)
AC input voltage220 - 240 V
Energy efficiency scaleA to G
Water consumption per cycle48 L
Package depth695 mm
Package width650 mm
Package height890 mm
Package weight77000 g
Weight and Dimensions IconWeight and Dimensions
Width600 mm
Height850 mm
Weight74000 g

Related product manuals