Operating procedure
1.Push the POWER button to switch on the power.
2.Push the PROGRAM button to select the suitable automatic program.
Do not use the SOAK program for the woolen laundries.
Wash the laundries that are prone to lose colors separately from other laundries.
while washing soft laundries such as silk stockings and textile , please put into a wash net which can get by shopping.
Even there's no water in the tub, the spinning will start after a certain period.
Attention
13
Even there's no water in the tub, a certain period is required before spin starting.
After the machine starts operation, you can only set the program and procedure during washing and soaking,
During rinsing you can only set the spinning time. and can not make setting in other cases.
3 Push "SOAK" "WASH" "RINSE" "SPIN" button to select suitable procedure program
During speedy and tub dry programs, push the wash ,rinse spin button the machine have no reaction.
Separate the laundries that are not colorfast from other laundries in washing.
The soak procedure can work in cooperation with automatic programs like MEMORY, ,STANDARD
There is intermittent pulsator stirring during soak.
HEAVYECONOMY,
After switching on the power, the machine will set to standard program auto matically. To select other program, push the
PROGRAM button till the corresponding indicator is on. Refer to the PROGRAM button in Page 11.
For an example: select SPEEDY for the quick washing of the laundries with light dirt.
Page 11
When a or cycle is selected, the fuzzy program is run. The water level can be selected according to be
texture and volume of the laundry.
STANDARD MEMORY
To Next Page
Loading...
Need help?
General