Clean
Remove and clean the detergent
box, replace after cleaning.
The lint filter must be used during
washing.
It must be cleaned after each
use
Lint filter:
1.Pull it up to remove it.
2.Push it down to install.
3.Clean the filter screen after
each wash.
remove Install
Dismantle
Install
The filter screen of the water inlet valve
may become to be blocked by foreign
materials and influence the water inlet.
Please clean it with brush every two
months.
7 Maintenance
Remove the power plug from the wall before cleaning.
If the cabinet is dirty, wipe it with a wet
cloth
Do not wash it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol,
alcohol etc.
1.After washing, turn off the water faucet. ( If needed, you can remove the water
inlet hose).
Th
inne
r
P
et
rol
Alcohol
Clean the lint filter after each wash.
5.Wipe up any drops of water on the surface of the machine and inside the tub.
Open the lid for about 1 hour , then close the lid.
4.Hang up the power cord and drain hose.
3.Remove the power plug before carrying out any cleaning or maintenance.
2.Do not store water in the washing machine for a long period. Drain the water
completely .
14
To Next Page
Loading...
Need help?
General
