Document #101-0009 4 3/09/05
I. INTRODUCTION
The C2000 Controller makes operating a Bill Changer simple. The Controller monitors the inputs from the
various components and controls the Validator, Stacker and Hopper(s). It also monitors the power supply for
fluctuations in current and voltage.
When the customer inserts a bill, change or tokens are dispensed according to a payout scheme selected by
the operator. There are many payout schemes embedded in the program that are easily accessed by changing
switch settings. Also, in the event of short power failures, the Controller will retain in memory any uncompleted
payouts. Another feature is an LED that indicates the status of the changer, displaying error codes if necessary.
Options
The C2000 Controller features several options.
♦ Tokenotes® can be accepted to vend token coins when a token payout scheme is
selected. (Refer to the Tokenote® Training Guide.)
♦ $1bills can be separated from $5, $10 and $20 bills when a dual stacker is installed.
(Refer to the Dual Stacker Manual.)
♦ The standard C2000 Controller accesses different preprogrammed payouts using
DIP switches.
To Next Page
Loading...
Need help?
General