Hanns.G HW173ABB User Manual

User’s Manual
INSTALLATION INSTRUCTIONS
Install Remove
Figure.1. Installing and Removing the Base
INSTALLATION:
1. Align the monitor with the opening in the base.
2. Note that the longer section of the base points forward.
3. Snap the monitor into its base. A clear click sound will affirm that the base is connected
correctly.
4. Verify that the monitor is securely attached to the base by looking at the bottom of the
base and making sure that the clips are fully engaged in the base.
REMOVAL:
1. Flip over the monitor so that it is upside down.
2. Press the 2 clips on the base that holds the monitor in place.
3. Gently press and hold the 2 clips while pulling the base from the monitor unit they are
unattached.
POWER
POWER SOURCE:
1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an Internal universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3. Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other
end to wall-outlet .
8

Hanns.G HW173ABB Specifications

General

Pixel pitch	0.255 x 0.255 mm
Aspect ratio	16:10
Display diagonal	17 \
Display resolution	1440 x 900 pixels
Viewing angle, vertical	150 °
Contrast ratio (typical)	600:1
Display number of colors	16.78 million colors
Display brightness (typical)	250 cd/m²
AC (power) in	Yes
DVI-D ports quantity	0
Power consumption (standby)	1 W
Power consumption (typical)	19.6 W
Power requirements	AC
Certification	CE, FCC, BSMI, CB, UL/CUL, NEMKO/GS, CCC, MPRII, MIC, GOST, PSB, VCCI, C-Tick
Product color	Black
Market positioning	-
LED indicators	Stand-by
Tilt angle range	0 - 20 °
Panel mounting interface	100 x 100 mm
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth (without stand)	198 mm
Width (without stand)	368.3 mm
Height (without stand)	401.3 mm
Weight (without stand)	3400 g