EasyManuals Logo
Home>Hardi>Paint Sprayer>LX-MB Series

Hardi LX-MB Series User Manual

Hardi LX-MB Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
23
Level indicator
Depending on products used, it can become difficult
to see the red sphere inside the level indicator tube.
Note that the tube can be replaced when necessary.
Off-season storage
When the spraying season is over you should devote
some extra time to the sprayer before it is stored.
Hoses
Check that none of the hoses are caught or have sharp bends.
A leaky hose can give an annoying delay in the middle of the spraying
job. Therefore check all the hoses and change if there is any doubt
about the durability.
Paint
Some chemicals are very hard on paints. It is therefore well advised to
remove rust, if any, and then touch up the paint.
Tank
Check that no chemical residues are left from the last spraying. Chemi-
cal residues must not be left in the tank for a long time. It will reduce
the life of the tank. See Spray Technique book - Cleaning the sprayer.
Operating unit
Take care that the safety valve is
completely loosened. The spring is
thereby relieved and operation difficul-
ties are avoided at starting-up next
season.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hardi LX-MB Series and is the answer not in the manual?

Hardi LX-MB Series Specifications

General IconGeneral
BrandHardi
ModelLX-MB Series
CategoryPaint Sprayer
LanguageEnglish

Related product manuals