18 HARDI
®
N-SERIES 3-PT SPRAYER DIAPHRAGM OPERATOR'S MANUAL
4.0 OPERATING INSTRUCTIONS
4.1 Filling The Main Tank (all models)
Water is fi lled into the tank by re mov ing the tank lid located at the
center of sprayer tank. It is rec om mend ed to use water as clean as
possible for spraying pur pos es. Fill water through the strainer basket
(optional) to pre vent foreign par ti cles from entering the tank.
WARNING: DO NOT LET THE FILLING HOSE ENTER THE TANK.
KEEP IT OUT SIDE THE TANK, POINTING TOWARDS
THE FILLING HOLE (FIG. 8). IF THE END OF THE
HOSE IS BENEATH THE SURFACE OF THE
TANK CONTENTS AND THE WATER SUPPLY
STOPS, CHEMICALS
MAY BE SIPHONED
BACK AND CONTAMI-
NATE THE WATER
SUPPLY SOURCE
AND LINES.
4.2 Filling The Clean Water Tank (optional)
Unscrew the clean water tank lid and fi ll with clean water only.
IMPORTANT: The water from this tank is only for hand washing,
cleaning blocked nozzles, etc.
WARNING: ALTHOUGH THE HANDWASH TANK IS
ONLY FILLED WITH CLEAN WATER,
THE WATER MUST NEVER BE USED
FOR DRINKING, DUE TO THE SMALL
RISK OF CONTAMINATION WHILE
FILLING, ETC.
Fig. 8
Fig. 9
To Next Page
Loading...
Need help?
General
