3
www.hardlifeutility.c om
ASSEMBLY INSTRUCTIONS
1. Adhere to the instructions mentioned in this manual during assembly, anchoring, use, and removal of the
shelters. Improper assembly can result in potential hazards.
2. Keep the work area free of clutter.
3. Assemble and install the shelters only on at, hard, and level surfaces. Do not install the shelters on slip-
pery or wet surfaces, in areas of high-velocity winds, or near snow dris.
4. Ensure to keep children and bystanders away during installation, maintenance, and removal of the shel-
ters.
5. Ensure proper footing and balance at all times.
6. Do not assemble the shelter under the inuence of alcohol, drugs, or medication. Read the warning labels
on your medication to determine if your judgment or reexes may be impacted.
7. Do not assemble the shelter in windy conditions; fasten the base of the shelter in concrete if it’s likely to
be windy.
8. Ensure personal safety during assembly of the shelter. Wear safety goggles and gloves during assembly,
and exercise caution when handling clips and tubes.
9. Ensure there is adequate ventilation for exhaust and other dangerous fumes.
USAGE INSTRUCTIONS
1. Ensure that the roof fabric is clear of snow at all times, taking care to remove snow manually if it does not
fall o by itself.
2. Ensure to keep the shelter away from heat sources. Do not expose the tarpaulin to open ame.
3. Ensure to remove the fabric cover before hurricanes and blizzards.
4. Tighten the fabric cover every month.
5. Ensure adult supervision at all times.
SHELTER SPECIFICATIONS
DIMENSIONS C2620 C2640
Overall Dimensions (m) 8W X 6L X 3H 8W X 12L X 3H
To Next Page
Loading...
Need help?
General
