Name: Harman Kardon AVR 10
Brand: Harman Kardon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Main In

When a separate pre-amplifier is

connected and this unit is used as a

power amplifier, connect the pre-

amplifier output to these jacks.

NOTE: When you do not use the PRE

OUT and MAIN IN separately, always

connect the PRE OUT and MAIN IN

jacks with the jumper plugs.

14. SUBWOOFER

OUTPUT JACKS

Connect a powered subwoofer to these

jacks. This output may also be used

for any external component requiring

a full range volume level input.

15. SPEAKER TERMINALS

Connect the front left (L) and right (R)

speakers to the corresponding

terminals. Make sure that the positive

(+ or red) and negative (- or black)

terminals on the speakers are

connected to the corresponding

terminals on the receiver.

16. CENTER/REAR

SPEAKER TERMINALS

Connect the center and rear speakers

to the corresponding terminals. Make

sure that the positive (+ or red) and

negative (- or black) terminals on the

speakers are connected to the corre-

sponding terminals on the receiver.

When you connect the rear speakers,

connect both L and R speakers.

PLEASE NOTE: Sound will not be

provided through the rear speakers

unless both speakers are connected.

17. AC INPUT CORD

Plug this cord in AC outlet on a wall.

18. AC SWITCHED OUTLET

These outlets provides AC power. The

AC power is switched by the power

button of this receiver. Use this outlet

for a CD player or a cassette deck.

ENGLISH

AVR10 engelsk 11/01/98 10:10 Side 7

Other manuals for Harman Kardon AVR 10

Quick Installation Guide1 page

Service Bulletin3 pages

Questions and Answers:

Need help?

Do you have a question about the Harman Kardon AVR 10 and is the answer not in the manual?

Harman Kardon AVR 10 Specifications

Power

continuous average power stereo mode	35 Watts from 20Hz-20kHz @ <0.09% THD, both channels driven into 8 Ohms
continuous average power five channel surround mode front L&R channels	30 Watts from 20Hz-20kHz @ <0.3% THD, both channels driven into 8 Ohms
continuous average power five channel surround mode center channel	30 Watts at 1kHz @ <0.3% THD, driven into 8 Ohms

Amplifier Section