Instruction Manual | 5
CE-Series Universal Control Extenders
Overview
The CE-Series of Universal Control Extenders provide port expansion over Ethernet for any control system. The HControl
protocol provides a simple path and value approach to actuating the device functions. The use of the CE-Series Control
Extender with other HControl-aware Harman products makes a seamless extension of those systems. The Ethernet
connectivity helps break distance limitations and provide flexibility of installation.
CE-Series Control Extender boxes
Control Extender – 8 Relay
Common Features
CE-Series Common Features
IMENSIONS
2.5 cm x 10.3 cm x 10.4 cm
(1/4 RU Width x <1 RU Height)
EIGHT
OWER
REQUIREMENTS
PoE – 802.3af Class 0 Maximum
Powder-coated steel w/ grey matt finish
FCC Part 15 Class B, CE, and IEC 60950
Requirements
0° C (32° F) to 40° C (104° F)
Storage Temperature:
-10° C (14° F) to 60° C (140° F)
Operating Humidity:
5% to 85% RH (non-condensing)
Heat Dissipation (Typical): 36.9 BTU/hr
Designed for indoor use only.
A multi-colored LED indicating the device status (see fig ???)
A network link/activity light
RJ-45 connector provides IP communication and PoE
Module-specific captive wire connectors (See below)
To Next Page
Loading...
General