Harman crown DSi Series User Manual

DSi Series Power Amplifiers
4 Advanced Features and Options (continued)
Figure 4.4 shows the Menu Tree, which is the navigation path of
options in the Menu. Later in this manual is a table that shows how
to access various presets and DSP processes.
NAVIGATING THE LCD SCREEN MENU: BASICS
To step through the Menu options, press the Sel , Next or Prev
buttons as described in the table later in this manual.
ICONS illuminated at the top of the screen show which DSP
functions are active with the current preset.
When you are modifying a preset, its ICON flashes. You can scroll
through its settings with the Prev and Next buttons. When you
see the desired setting, select it by pressing Sel .
Doing nothing returns you to the CURRENT PRESET after ten
seconds.
In the LCD screen, if the PRESET icon is lit, the current preset is
unchanged from its stored settings If the CUSTOM icon is lit, the
current preset has been changed from its stored settings.
PRESETS: The DSi amplifier provides 20 presets total. One is
"DSP OFF." Fifteen are JBL loudspeaker presets that can be
changed. Four are user presets that can be changed.
Doing nothing returns you to the CURRENT PRESET after a
time-out delay.
Starting from the CURRENT PRESET, Sel > Sel > Next goes to
presets.
Sel > Next> Sel lets you configure the DSP processes.
DSP PROCESSES
The DSi amplifier includes a number of DSP processes, which
appear as ICONS on the screen. They are described below
Y (Input Y): The options are
• CH1+CH2 (Ch.1 input signal and Ch. 2 input signal are summed
and fed to both output channels.) This provides a 6 dB level boost.
• INPUT Y (Ch. 1 input signal goes to Ch. 1 and Ch. 2 output. Ch.
2 input signal is ignored.)
• STEREO (Ch 1 input goes to Ch. 1 output. Ch. 2 input goes to
Ch. 2 output)
Operation Manual
Power-up
CURRENT PRESET
Sel
MENU TREE
~cratnn ·
'6' bv HARMAN
FLASHING "PRESET" TEXT ___ N_e_xt_o_r_P_re_v --.o FLASHING "CONFIG" TEXT
Sel Sel
----~--~ Next
FLASHING "PRESET" ICON
Sel
PRESETS
(TEXT on screen)
DSP OFF
DSP PROCESSES
(ICONS on screen)
Sel
Press Next to see
each processor's
options, then press
Sel to select an option.
90 Hz, 100 Hz, 1200 Hz,
z, 2000 Hz. 2-CH SUB,
CURRENT , OFF, 50, 40, 30,
20,10, 9, 8, 7, 6, 5, 4, 3, 2, 1
CURRENT, OFF, 50, 40, 30,
20,10,9,8, 7, 6,5,4,3, 2, 1
Figure 4.4 MenuTree
page 15

Harman crown DSi Series Specifications

General

Brand	Harman
Model	crown DSi Series
Category	Amplifier
Language	English