Harman crown DSi Series User Manual

DSi Series Power Amplifiers
~cTatun·
'81 ovHARMAN
HOW TO ACCESS PRESETS AND DSP PROCESSES
DESIRED FUNCTION
BUTTON PRESSES
{starting from the current preset screen}
Set amplifier to BRIDGE-MONO mode by loading the Quick-Start BRIDGE preset
Sel > Sel. Press Next until you see BRIDGE. Press Sel.
Set STEREO or BRIDGE-MONO mode manually
Sel >Next.Press Sel until the BRG icon flashes. Press Next to set the amplifier to Bridge-Mono,
or press Prev to set the amplifier to Stereo. Press Sel to select your choice.
Select a user preset
Sel > Sel. Press Next until you see PRESET 17-20. Press Sel.
Set INPUT Y mode
Sel >Next> Sel. The Y icon flashes. Press Next to see the three options.
Choose one by pressing Sel.
Set EQ in or out for Ch. 1 or Ch. 2
Sel >Next.Press Sel until the EQ icon flashes along with CH1 or CH2.
Press Next to turn EQ on or off. Press Sel.
Set DELAY for Ch. 1 or Ch. 2
Sel >Next.Press Sel until the DEL icon flashes along with CH1 or CH2.
Press Next until you see the amount of delay you want, then press Sel to select it.
Set LIMITING for Ch. 1 or Ch. 2
Sel >Next.Press Sel until the LIM icon flashes along with CH1 or CH2.
Press Next until you see the limiting threshold you want, then press Sel to select it.
Turn off all the DSP
Sel > Sel. Press Next until you see DSP OFF. Press Sel.
Configure a USER PRESET or modify a FACTORY PRESET
1. Sel>Sel.
2. Press Next until you see the desired preset. Press Sel to select it.
3. Sel > Next.
4. Press Sel unti I you see the DSP process you want to apply to that preset.
5. Press Next to see the processing options, then press Sel to select an option.
6. Repeat Steps 1-5 for all the processes you wish to apply to that preset. The CUSTOM ICON
will light if a factory preset has been modified.
A
• When you call up the XOV process, Ch.1 will always be set to low frequencies and Ch. 2
will always be set to high frequencies. DD NOT connect high-frequency drivers to Ch. 1.
Operation Manual
page 17

Harman crown DSi Series Specifications

General

Brand	Harman
Model	crown DSi Series
Category	Amplifier
Language	English