EasyManuals Logo
Home>Harman>Recording Equipment>DBX 162SL

Harman DBX 162SL User Manual

Harman DBX 162SL
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
INPUTS
Connectors: Female XLR and 1/4” TRS (Pin 2 and Tip hot)
Type: Electronically balanced/unbalanced, RF filtered.
Impedance: Balanced > 50 k, unbalanced > 25 k.
Maximum Input Level: >+24dBu balanced and unbalanced.
CMRR: >40dB; typically > 55dB at 1kHz
OUTPUTS
Connectors: Male XLR and 1/4” TRS (Pin 2 and Tip hot)
Type: Transformer balanced/unbalanced, RF filtered.
Impedance: Balanced 30, unbalanced 15.
Maximum Output Level: >+24dBu, >+22dBm(into 600 Load).
SIDECHAIN SEND (OUTPUT)
Connector: 1/4” TRS
Type: Impedance balanced, RF filtered.
Impedance: Balanced 100, unbalanced 50.
Maximum Output Level: >+22dBu.
SIDECHAIN RETURN (INPUT)
Connector: 1/4” TRS
Type: Electronically balanced/unbalanced, RF filtered.
Impedance: Balanced >40 k, unbalanced >20k.
Maximum Input Level: >+22dBu balanced or unbalanced.
CMRR: >40dB; typically > 55dB at 1kHz.
SYSTEM PERFORMANCE
0.1dB Bandwidth: 20 Hz to 20 kHz +0/-0.1dB, no gain reduction, unity gain.
Frequency Response: <2 Hz to >200 kHz +0/-3.0dB, no gain reduction, unity gain.
Noise: <-93dBu, unweighted, 20 Hz to 20 kHz measurement bandwidth.
Dynamic Range: >117dB
THD + Noise: 0.008% typical at +4dBu, 1kHz, unity gain.
0.02% typical at +20dBu, 1kHz, unity gain.
<0.1% any amount of compression up to 30dB, 1kHz
IMD: <0.02% SMPTE 4:1, no gain reduction, unity gain, 0dBu input.
Deviation From Linear Phase: <1.0 degree, <10 Hz to 200 kHz, 30dB of compression.
Interchannel Crosstalk: <-85dB, 20 Hz to 20 kHz.
Stereo Coupling: True RMS Power Summing™.
COMPRESSOR
Threshold Range: -40 to +20dBu
Ratio: 1:1 to :1
Threshold Characteristic: Selectable OverEasy‚ or hard knee.
Attack/Release Modes: Selectable Manual or Auto.
Manual Attack Time: Scalable program-dependent. Typically 400dB/msec to 1dB/msec.
Manual Release Time: Scalable program-dependent. Typically 4000dB/sec to 10dB/sec.
Auto Attack Time: Program dependent, typically 15 ms for 10dB, 5 ms for 20dB, 3 ms
for 30dB.
Auto Release Time: Program dependent, typically 120dB/sec.
Output Gain: -20 to +20dB.
LIMITER
Threshold Range: +4dBu to >+24dBu (off).
Ratio: :1
Limiter Type: PeakStopPlus® two-stage limiter.
Stage 1: Instantaneous Transient Clamp®.
Attack Time: Zero
Release Time: Zero
Stage 2: Intelligent Predictive Limiting®.
Attack Time: Program dependent, typically <5 msec.
Release Time: Program dependent, typically 22dB/sec.
27

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Harman DBX 162SL and is the answer not in the manual?

Harman DBX 162SL Specifications

General IconGeneral
BrandHarman
ModelDBX 162SL
CategoryRecording Equipment
LanguageEnglish

Related product manuals