1818
6.4.2 Standalone Bluetooth stereo system
By connecting the two detachable speakers, you can set up a
stereo music system with L (left) and R (right) channels.
1
2
< 10 m / 33 ft
L R
>5S
>5S
1. Make sure that the left and right rear speakers are properly
placed, the L speaker on the left and the R speaker on the
right.
2. Connect the two speakers:
a) On one speaker, press and hold until the status indicator
ashes cyan.
b) Within three minutes, press and hold on the other
speaker until the status indicator ashes cyan.
J : Ready for Bluetooth Stereo pairing
J : Bluetooth Stereo connected
L R
3. The two speakers start to play music from the device
connected to the primary speaker.
To break the Bluetooth Stereo link between the two
speakers
L / R
>5S
• On either of the connected speakers, press and hold until
the status indicator ashes cyan.
J : You break the Bluetooth Stereo link between the two
speakers.
J : The speakers switch to the Bluetooth pairing mode and
reconnect the last paired Bluetooth device respectively.
NOTES:
– The Bluetooth connection will be lost if the distance between the
soundbar and Bluetooth device exceeds 33 ft (10 m).
– Electronic devices may cause radio interference. Devices that
generate electromagnetic waves must be kept away from the
Soundbar, such as microwaves and wireless LAN devices.
To Next Page
Loading...
Need help?
General
