- 18 -
Cleaning the product
R
L
Use a clean cotton swab slightly moistened with alcohol to:
1. Remove earwax and dirt from the ear tips on your earbuds.
2. Clean the charging pins on your earbuds and in the charging case respectively.
Then use a dry and soft cotton to rub down the dust and lint.
3. Clean the grooves on the cover and at the bottom of the charging case.
After cleaning, make sure the charging case and earbuds are dry before putting
the earbuds back into the charging case.
TIP:
• You are recommended to repeat the operation every few weeks or so to keep
your earbuds clean and not affect the charging speed or quality.
To Next Page
Loading...
Need help?
General