EasyManuals Logo
Home>Harman>Stove>P43

Harman P43 Installation & Operating Manual

Harman P43
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12 P43 Pellet Stove 3-90-04301R18_03/13
#4 Installing into an existing chimney
This method provides excellent venting for normal
operation. This method also provides natural draft in
the event of a power failure. If the chimney condition
is questionable* you may want to install a liner as in
method #7.
In some places in the US and Canada it is required
that the vent pipe extend all the way to the top of the
chimney.
*The chimney should be inspected and cleaned before
installing your stove. If you discover that the chimney
does not have a clay tile liner or has cracks or aking of
the tile liner you will need to install a stainless steel liner
within the chimney. In most cases the inside diameter
of this liner should be 4". Either exible or rigid liner
may be used for this purpose. Refer to Method 6 & 7.
Be sure to design the venting so that it can be easily
cleaned.
#5 Installing into an existing replace
chimney
This method provides excellent venting for normal
operation. This method also provides natural draft in
the event of a power failure. If the chimney condition
is questionable* you may want to install a liner as in
method #6.
In some places in the US and Canada it is required
that the vent pipe extend all the way to the top of the
chimney.
*The chimney should be inspected and cleaned before
installing your stove. If you discover that the chimney
does not have a clay tile liner or has cracks or aking of
the tile liner you will need to install a stainless steel liner
within the chimney. In most cases the inside diameter
of this liner should be 4". Either exible or rigid liner
may be used for this purpose. Refer to Method 6 & 7.
The chimney should be sealed at the damper using a
steel plate. Kaowool, mineral wool or an equivalent non-
combustible insulation is recommended to be installed
on top of the sealing plate to reduce the possibility
of condensation. The connector pipe should extend
through the smoke chamber to the base or into the
rst ue tile.
Be sure to design the venting so that it can be easily
cleaned.
Fig. 10
Fig. 11
Venting

Other manuals for Harman P43

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Harman P43 and is the answer not in the manual?

Harman P43 Specifications

General IconGeneral
BrandHarman
ModelP43
CategoryStove
LanguageEnglish

Related product manuals