Harman Studer D21m User Manual

Date printed: 24.01.12
22
D21m System
5.8 Connection to the Performa Core
The Performa core is connected to the D21m I/O System in a similar way as
the SCore. The main difference is that the HD link connection from the core
towards the D21m I/O frame only carries up to 48 channels (at both 48 and
96 kHz). In order to implement a correct mapping of the I/O cards’ channels
to the HD Link, the ‘Performa Mode’ switch (or jumper) must be ON on the
HD cards. In the Performa core, use of the PE-D21m card (A950.060622) is
mandatory. Each card implements one HD link input with up to 96 channels,
and one HD link output with up to 48 channels.
Application Examples
Local I/O Only (located close to the core)
I/O Frame
(One or
Multiple)
Performa
DSP Core
(PE and
PE D21m
Cards
96 Ch In
48 Ch Out
96 Ch In
48 Ch Out
96 Ch In
48 Ch Out
RS422 from Desk for
Surveyor Information
and Mic Control
96 Ch In
48 Ch Out
4...6 AES/EBU Outputs
to Monitoring Frame
Studer Proprietary HD Link
(max. Distance 10 m)
Remote I/O Box (within long distance)
Hub
(and I/O)
Remote
I/O Box
Performa
DSP Core
(PE and
PED21m
Cards
96 Ch In
48 Ch Out
96 Ch In
48 Ch Out
96 Ch In
48 Ch Out
RS422 from Desk for
Surveyor Information
and Mic Control
I/O frame with Different
Types of I/O Cards
0...64 Ch Optical MADI 0...64 Ch Optical MADI
(Redundancy)
96 Ch In
48 Ch Out
4...6 AES/EBU Outputs
to Monitoring Frame
Studer Proprietary HD Link
(max. Distance 10 m)
Standard Dual Optical MADI Cable with
SC Type Connectors. Max. 64 Channels,
Includes Mic Control Signals and
Surveillance Information.

Harman Studer D21m Specifications

General

Brand	Harman
Model	Studer D21m
Category	Recording Equipment
Language	English