HART HPSV25 User Manual

8 – English
NOTE: ILLUSTRATIONS START ON PAGE 9
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
MAINTENANCE
CLEANING/REPLACING THE FILTER
See Figure 12, page 11.
 Removethebatterypackandthedustbowl.
 Removetheseparatorassemblybypullingitoutofthe
dustbowl.
 Shakeorlightlybrushanydustordirtofftheseparator
assembly.
 Remove the filter frame and filter from the separator
assembly.
 Remove the filter by lifting away from the separator
assembly.Thefiltermayberinsedifnecessary.
 Empty the dustbowl; wash if necessary. Before
reattaching to the stick vac, make sure all pieces are
completelydry.
NOTE:Allow24hoursforpartstodrycompletely.
 Reinsert the filter and filter frame into the separator
assembly.
 Installtheseparatorassemblyintothedustbowl.
 Positionthetwosectionsasshown.
 Reattachthedustbowlbysecuringthehookonthedust
bowltothetabonthehandle.
NOTE: Makesure hook is secured tothe tab before
securingthedustbowl.
 Snapthetwosectionstogether.
Whenpurchasingareplacementfilter,requestrecommended
partnumberHASV25.

HART HPSV25 Specifications

General

Brand	HART
Model	HPSV25
Category	Vacuum Cleaner
Language	English