II. Technical Requirements
Dimensions
• Note that the dimensions below are for the majority of standard configurations. Some units
may have custom dimensions according to alternative design configurations.
• Dimensions of LX1 and LX2 are 15” W x 32” D x 30” H (38.1cm W x 81.3cm D x 76.2cm H)
• Dimensions of LX3 are 19” W x 34” D x 34” H (48.3cm W x 86.4cm D x 86.4cm H)
Clearances
• Maintain at least 6 inches (15 cm) clearance on the sides and rear for sufficient air flow.
• Maintain at least 36 inches (91 cm) on the front for access to the main controller during
normal operation.
• Maintain access to the top of the unit.
• Additional clearances on the sides and rear may be required for service.
To Next Page
Loading...
Need help?
General
