4.3. Stopping the engine
Never stop the engine by moving the
decompression lever. During breaks
in work or at the conclusion of the working pe-
riod, keep the starting handle and starting key
in a safe place, out of reach of unauthorized
persons.
24
– Move speed control lever „1“ back to the
STOP position.
– On engines with the lower engine speeds
not accessible, move speed control lever „1“
back, then move stop lever „2“ in the STOP
direction. Hold it there until the engine has
stopped.
– Release the stop lever „2“ when the engine
has stopped, making sure that the lever re-
turns to its normal operating position.
Electrical system
25
The charge „2“ and oil pressure telltales „3“
come on.
– Turn the key to the 0 position and pull it out.
The telltale lights must then go out.
Note:
Engines with an automatic electrical shutdown
system (Chapter. 4.2.5.) can also be switched
off by turning the start key back to position 0.
To Next Page
Loading...
Need help?
General
