– To repeat the starting attempt, wait for the en-
gine to cease rotating, reset the automatic de-
compression device and turn the starting
handle in the correct starting direction again.
4.3. Stopping the engine
If the engine is shut down for a short
period, or at the end of the working
day or shift, keep the key and the starting
handel in a safe place, out of reach of un-
authorized persons.
Engines with electric starter
23
– Move the speed control lever to the stop posi-
tion; the engine will be shut down.
24
– Turn the starter key to the 0 position and pull
it out. The pilot lamp lights must then go out.
Note:
Engines with an automatic shut-down function
can also be switched off by turning the start key
back to position 0.
Engines with starting handle
– Move the speed control lever to the stop posi-
tion; the engine will be shut down (Picture 23).
Never stop the engine by moving the
decompression lever.
To Next Page
Loading...
Need help?
General
