Contents
Page
1. Important notes on safe operation of the engine 3
2. Description of engine 5
3. General information 9
3.1. Technical data
3.2. Transport
3.3 Installation instructions
3.4. Load on engine
3.5. EPA / CARB - type plates and fuel label
3.6. Emission-related installation
instructions
4. Operation 12
4.1. Before initial start-up
4.2. Starting the engine
4.3. Stopping the engine
5. Maintenance 21
5.1. Maintenance summary
5.2. Maintenance every 8 - 15 hours of operation
5.3. Maintenance every 250 hours of operation
5.4. Maintenance every 500 hours of operation
5.5. Maintenance every 1000 hours of operation
6. Operating checks and repair work 37
6.1. Checking operation of air cleaner maintenance indicator
6.2. Renewing fan drive belt, checking operation of belt monitor
7. Malfunctions – causes and remedies 41
8. Work on the electrical system 45
9. Protective treatment 45
SUPPLEMENTAL INFORMATION TO THE OWNER’S MANUAL FOR 2008 AND LATER
EPA CERTIFIED NONROAD COMPRESSION IGNITION ENGINES 47
SUPPLEMENTAL INFORMATION TO THE OWNER’S MANUAL FOR 2008
AND LATER CALIFORNIA REGULATIONS FOR HEAVY-DUTY OFF-ROAD ENGINES 65
This symbol draws attention to important safety precautions.
Please comply with them most carefully in order to avoid any risk of injury to persons or
damage to materials.
General legal requirements or safety regulations issued by the competent authorities or
industrial accident insurers are also applicable.
2
To Next Page
Loading...
Need help?
General
