Hayward DV5000 User Manual

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Page 5 of 39 DV5000ML Rev. A
Installation
1. Slide the Disc onto the cleaner body insuring the side marked “UP” is up. Start one side of the Disc inner edge in the
Foot groove and pull and flex the Disc until its inner edge is fully in the groove and the Disc rotates easily. Slide the
Wear Ring onto the Foot bottom flange, insuring the stepped side is down. Flex the top edge over the flange until it
is completely above it and the Ring rotates freely.
2. Turn off your pump.
3. If connecting through your skimmer, insert the Adapter into the Skimmer outlet and the first hose through the
Skimmer inlet and its male end into the Adapter.
4. If connecting through your dedicated suction outlet, lift the cover and insert the first hose male end directly into the
outlet.

Hayward DV5000 Specifications

General

Brand	Hayward
Model	DV5000
Category	Swimming Pool Vacuum
Language	English