Hayward SharkVAC General Information

Specifications
Suction Rate 75 gal/min
Current Consumption 0.78 amps
Weight (w/o cable) 21.5 lbs
Cable Length, Type 50 ft
Materials High Impact ABS - Metal Parts of
Non-Ferrous Stainless Steel
Motor Unit
PUMP DRIVE PCB
Speed (rpm) 2,700 55 -
Voltage 24V DC 22V DC 5V DC
Current (amp) 2.62 0.63 -
Waterproof Sealing Double Redundant Radial Shaft Seals & 0-Rings.
Housing Sealed, Watertight, High Impact Polypropelene
Overload Protection Electronic Overload Monitoring w/auto-shutoff.
Filter
Type Removable, Re-Usable, Pleated Element Cartridge
Media Pleated Cellulose/Polyester Blend
Porosity 100 micron
Area 1,150 sq. inches
Cleaning Routine Control
Type Adaptive Seek Control Logic (ASCL¨) Microprocessor
Cleaning Cycle 2 hrs
Drive System
Direct Drive w/Polyurethane Drive Track & Acetal/Stainless Steel Bearing System
Power Supply.
Input Primary Voltage 110-120 volt AC (220-240 volts for 240 volt model)
Output Secondary Voltage 24V DC
Rated Output Current 4 amps
Weight 8.3 lbs
These specifications may vary in different swimming pools and electrical supply
outlets.
Shipping
SharkVAC
Carton Dimensions Height 19 in. (48.3 cm) 21 in. (53.3 cm)
Width 19 in. (48.3 cm) 19 in. (48.3 cm)
Length 19 in. (48.3 cm) 21 in. (53.3 cm)
Shipping Weight 21.5 lbs (19.1 kg)
Although the SharkVAC has been tested to work in a wide range of swimming pools,
AquaVac Systems cannot guarantee proper operation in all swimming pools.

Hayward SharkVAC Specifications

Power

current consumption	0.78 amps
primary voltage	110-120 volt AC (220-240 volts for 240 volt model)
secondary voltage	24V DC

Motor Specifications

speed	2, 700 rpm
voltage	24V DC, 22V DC, 5V DC
current	2.62 amps, 0.63 amps

Filter

filter type	removable, re-usable, pleated element cartridge
filter porosity	100 micron
filter area	1, 150 sq. inches

Weight and Dimensions

weight without cable	21.5 lbs
cable length	50 ft
shipping weight	21.5 lbs (19.1 kg)