2 Heat & Glo • 7076-250C 7/11/2014
Curve 100
Hearth & Home Technologies welcomes you to our tradition
of excellence! In choosing a Heat & Glo appliance, you
have our assurance of commitment to quality, durability,
and performance.
This commitment begins with our research of the market,
including ‘Voice of the Customer’ contacts, ensuring we
make products that will satisfy your needs. Our Research
and Development facility then employs the world’s most
advanced technology to achieve the optimum operation of
our stoves, inserts and fi replaces. And yet we are old-fash-
ioned when it comes to craftsmanship. Each unit is meticu-
lously fabricated and surfaces are hand-fi nished for lasting
beauty and enjoyment. Our pledge to quality is completed
as each model undergoes a quality control inspection.
We wish you and your family many years of enjoyment in
the warmth and comfort of your hearth appliance. Thank
you for choosing Heat & Glo.
and Welcome to the Heat & Glo Family!
OVERALL AVERAGE EFFICIENCY BURNING HARD-
WOOD
(WHEN TESTED IN ACCORDANCE TO AS/NZS 4012)
62%
AVERAGE PARTICULATE EMISSION FACTOR BURN-
ING HARDWOOD
(WHEN TESTED IN ACCORDANCE TO AS/NZS 4013)
1.4 g/kg
MAXIMUM AVERAGE HEAT OUTPUT BURNING
HARDWOOD
3.9 kw
APPROVED FUEL
BURN ONLY HARDWOOD WITH A MOISTURE CON-
TENT LESS THAN 25% (dry basis).
WETBACK - ALL MODELS
MANUFACTURED BY
Wetbacks are NOT an approved option and must
not be tted.
NOTE: Performance may vary from test values
depending on actual operating conditions.
This appliance has been TESTED TO
AS/NZS4013 for Hardwood by HRL Technology
Report # HCMG/13/013
Date tested: May 2013
INSTALLATION DATE
INSTALLATIONS TO COMPLY WITH AS/NZS4013 AND
WILL REQUIRE A BUILDING CONSENT
IMPORTANT: Read all instructions carefully before starting installation. Failure to follow these
instructions may result in a fi re hazard and will void the warranty.
• Fig. 7.1,8.1,13.1,14.1,14.2 and Table 1,2 relate to installations with tested fl ue systems; as per AS/NZS
2918:2001 - Appendix F, with a ceiling angle between 0° - 30° inclusive.
• For installations with a ceiling angle greater than 30°, refer to Fig. 14.2 and AS/NZS 2918:2001 4.6.3(b)
• Ceiling Plate may vary in size depending on ceiling angle. Please specify ceiling pitch prior to ordering the
ceiling plate.
• Heat & Glo Curve 100 wood burner’s are tested and approved to the N.Z. National Environmental Stan-
dards;
Curve 100 Hardwood Certifi ed
Particulate Emissions = 1.4 g/kg Space Heating Effi ciency = 62%
To Next Page
Loading...
Need help?
General
