142 Programming: Programming Aids
4.7 List of All Current Error Messages
4.7 List of All Current Error
Messages
Function
With this function you can show a pop-up window in which the TNC
shows all current error messages. The TNC shows errors both from
the NC as well as those from the machine tool builder.
Show error list
You can call the list as soon as at least one error message is present:
U To display the list, press the ERR key.
U You can select one of the current error messages with
the arrow keys
U With the CE key or the DEL key you can delete the
error message from the pop-up window momentarily
selected. When you delete the last error message,
the pop-up window closes as well
U To close the pop-up window, press the ERR key again.
Current error messages are retained
Parallel to the error list you can also view the respective
help text in a separate window: Press the HELP key.
To Next Page
Need help?
General
